DIY - Lanvin Drop Pearl & Chain Necklace

Lanvin Necklace $595

 





* Silk, sheer, or nylon fabric, anything with a pretty drape {I used a vintage slip that had a layer of nylon/satin and a layer of sheer mesh}
* Flat oval links ox silver chain {Also found at JoAnn's}
* Loose Faux pearls {mine were left over from the MJ Trim Challenge}
* Tarnished silver metal head pins
* Tarnished silver metal oval jump rings {comes w/3 sizes, I used the smallest}
* Tarnished silver metal lobster clsaps {or not. It's a long chain, you don't need a clasp}
* 3 different Beading pliers {5 pack, 8.99 - the exact ones I use, got mine from JoAnn's}
* Scissors
* Wire cutters

how to after the jump

thanks to ... lovemegan!!!

* Cut fabric strips. They don't have to be perfect, but they do need to have smooth edges. Since I didn't have a luxurious fabric like silk, I used sheer and opaque pieces together to add some texture & variation. I also used the sheer to create one long ribbon-like strip. You may choose whatever colors you like. There's a teal and navyone as well.





* Decide how long you want your chain. Using your pliers, pull apart a metal link to remove excess linkage. If the chain is long enough to fit over your head, you don't need a clasp. If you want a shorter chain, slip the loop of the clasp onto the open chain link & pinch it shut. You won't need the other part of the lobster clasp because you can use the actual chain.




 
* Weave your long ribbon-like piece through part of the chain and tie the ends in loose knots.





 
* String a pearl on a head pin               * Bend the top w/round nose pliers


 
* Snip the end off with wire cutters        * Close the wire with pliers creating a circle/loop.





* String pearl on head pin, weave opaque fabric onto pin and push it down



* ...add sheer layer on top. {to some but not all} You need to weave the fabric so it cinches up over the pearl instead of lying completely over it.




* Follow the steps above to finish {bend head pin, snip off excess, pinch into small loop/circle}




 
* Using a jump ring, add a single loose pearl to the top {circle/loop you just created} and pinch closed. Leave some as single pearls, some as one pearl with fabric, and some with fabric and two pearls.





* Using the jump rings, attach your pearls to your chain. Follow the design in this tutorial {of the Lanvin piece} or create your very own!

















 

* I made some earrings too

Have Fun!